Standard cabinets
300x250x160mm à 1000x800x340mm
Special features that make difference
Door frame edging solely on left and right hand sides – increased cabling area.No lateral supports
– increased cabling and drilling areas, as well as possibility for cut-outs on the sides.
Fittings at the back of the cabinet for direct attachment of a DIN Rail.
Mounting brackets provided with every cabinet at no extra cost.
International Protection Degree IP65 / Mechanical Resistance IK10
Cabinets specifically used to house electrical and electronic equipment in a corrosive environment.
These cabinets are adapted for a range of uses and suit damp and corrosive indoor environments just as well as outdoor settings.
Extremely resistant to corrosion
Technical characteristics:
– Fibre-glass reinforced polyester cabinet
– Double insulated cabinet (class II)
– Protection Degree IP 66 (in accordance with EN60529)
– Mechanical Resistance Impact IK10 (in accordance with EN62262).
– Electrically insulating material.
– Moisture resistant material
– Resistant to extreme temperatures (from -30˚C to +120˚C)
– Colour RAL 7035
Standard accessoires:
– Inserts, 25mm fittings at the back of the cabinet allowing direct attachment of parts using standard cap screws.
– Top and bottom awnings integrated into cabinet mould.
– ¼ turn double bar locking system.
– Set of 4 polyamide swivelling mounting brackets.
– Grid pattern on the door to facilitate drilling.
– JPolyurethane watertight sealant fitted directly onto the door.
-Cast aluminium hinges – highly resistant to corrosion.
Optional accessories:
– Mounting plate in full/perforated galvanised steel or full polyester.
– Door window.
– Inserts on the door to allow attachment of accessories.
– Other locking systems: Ronis 1/4 turn lock, triangle…
– Interior pivoting face-plate.
– Modular frame.
– Equipment for attaching to beam, pole or post.
– Air vents, ventilation
– Notched Bars: allowing you to adjust the position of the connector board depth-wise.
Notre équipe commerciale, techniquement qualifiée, est constamment à l’écoute de vos besoins. Elle saura rechercher les produits les plus adaptés à vos attentes tout en respectant vos impératifs économiques.
La société Europoly est depuis plus de 20 ans un des leaders dans la fabrication de coffrets, armoires et cabines en polyester, GRP, armé fibre de verre. Tous nos produits sont fabriqués en France.
© Europoly 2024 | Mentions légales | Politique de confidentialité
Site réalisé par avicom’